Which website do you prefer to use to install a Wavlink WiFi extender? In such a case, don’t panic! You’ve arrived at the proper location.You can quickly increase the wireless extender speed and capture lost wireless network signals with a Wavlink AC1200 WiFi Extender Setup. You may extend the wireless signal coverage in your home or place of business with this extender gadget. If you’re setting up a wavlink range extender for the first time and are confused about how to continue, read this thread all the way through. Here are the simple instructions for setting up a Wavlink range extender.

Wavlink AC1200 Extender installation 

See the information below for a step-by-step instruction on installing the Wavlink AC1200 using WPS:

1. Connect the Wavlink AC1200 to the power source.
2. Wait until the extender’s solid blue light, which indicates that it is on and powered, turns on.
3. At this time, press the WPS button on the extender.
4. Press the WPS button on the wireless router or modem next.
5. As long as the extender’s LED is flashing, do not disconnect the AC1200.
6. Utilising the wps technique, the wavlink extender setup is finished.
7. You’ll see that the power, client, device, and WPS indicators on the WiFi repeater all become solid green.
8. Where the current weak signals are, install the Wavlink repeater. also achieve reliable WiFi connectivity.

Note:- If you need any help regarding your wifi extender so contact our technician or visit the official website that is Wavlink Aerial X AC1200 Extender Setup.

Wavlink AC1200 extender setup via the WPS button?

WPS is the simplest technique for setup the wavlink AC1200 wifi extender. As mentioned in the following rules:

• Turn on your extender first.
• Now, keep pressing the WPS button.
• If your extension and router are connected properly, your LED indicator will turn green.
• Utilizing the dual band range extender, repeat the operation.
• The network password you use for your router’s network should also be used here.
• The default username and password may be found in the WIFI extender documentation.
• Connect your wifi-enabled devices to the wavlink extension at the end.

Wavlink wifi extender firmware upgrade

The security and functionality of a device are improved by new firmware, therefore a Wavlink router has to have its firmware updated in order to perform effectively. Before accessing the web interface of a Wavlink router, you must visit the Wavlink Get website and download the appropriate firmware. Check the box of the package to make sure you have the right Wavlink router model number and product name.

Follow these steps to upgrade the firmware on your Wavlink wifi extender:

1. Switch on the wifi extender from Wavlink.
2. You may use any smartphone.
3. Visit 192.168.10.1 or Ap.setup and select an option to upgrade the firmware.
4. To complete the firmware upgrade procedure, follow the instructions.
5. Wait until it is completed, which will take a minute, before disconnecting the extension.

Nikitha